Big 5 catering BevoSano® is the dispenser we propose for the distribution of beverages in the health sector and, in general, for services where it is necessary to combine a high quality product with high technical performance: speed of dispensing, technical reliability, autonomy, hygiene and health security.
Big 5 catering BevoSano allows, starting from a maximum of 5 base soluble products, to offer up to 12 selections of hot drinks to choose among traditional drinks, sucrose-free sweetened beverages, gelled and thickened beverages for the health sector. Moreover, it is possible to set a specific button for the jug dose, bringing the total to 24 possible selections. The beverages are pre-dosed according to needs and all consumption data are stored in an internal software.
Voltage / Frequency (Volt/Hertz): 230 V – 50 Hz
Maximum power consumption: 3,2 Kw
Boiler capacity: 10 Lt
Number possible selections: 12 x 2
Number base products: 6
Outlet temperature: 70° / 90°
Electrical socket: CEE 7/7 (Schuko)
Water inlet: ½ “
Weight: Kg 35
Width: mm 500
Depth: mm 540
Height: mm 830
Support bench dimensions (WxDxH): Wx mm 500x Dx mm 540 x H mm 1000
In line with the environmental sustainability features characterizing the services General Beverages, our distributors have been designed and manufactured to achieve significant energy savings. In particular, the boilers are equipped with a special Armaflex AC insulation – a highly flexible material with closed cells..
Armaflex AC description
Highly flexible, closed cell insulating material.
Elastomeric expanded material, based on synthetic rubber with good thermal conductivity. Its thermal characteristics provide excellent insulation and condensation control.
Resistance factor to water vapor diffusion
μ ≥ 7.000 (Reg. Certificate n. D3319, complying with the EN 13469 Standard for pipes and EN 12086 standard for plates)
- Guaranteed energy saving
- Efficient vapor barrier
In addition, distributors are equipped with a programmable control system for the temperature of the boiler, which can be adjusted according to specific needs of use. Therefore, the user can decide whether to block or lower the water temperature in the boiler when heating is not required. These operations can be programmed via software.
These features and systems allow to save about 30% of energy consumption in normal ambient conditions.